Concept renders. Each finished piece shows its own grain, so yours will differ a little.
Task lamp
Karijini
A marri task lamp with a swivelling aluminium joint and a shallow turned timber shade.
$2,380 including GST
Delivered across Australia. [PLACEHOLDER: shipping rates and timing to confirm.]
About Karijini
Named for Karijini National Park, Western Australia
Karijini is a desk lamp built around one joint. A bead-blasted cast aluminium ball joint, with a small tension knob, lets the head pivot and swivel to put light exactly where you're working. The stem and the shallow cone shade are turned from marri, the base is a flat plate of orbital-sanded aluminium, and a flush frosted opal diffuser closes the underside of the shade so you see a soft, even glow and never the bulb.
Because every Karijini is made to order in the timber you choose, no two are quite the same. The grain, figure and colour are the tree's own, so expect some natural variation from the photos.
Specifications
- Dimensions
- 1600 mm high, 500 mm shade, 600 mm footprint
- Materials
- Turned marri stem, arm and shade, oil finish; cast aluminium ball joint, bead-blasted; orbital-sanded aluminium base; frosted opal glass diffuser
- Light source
- E27 LED globe included
- Output
- 1055 lumens
- Colour temperature
- 2700K
- CRI
- 90+
- Dimming
- Inline dimmer on the cord
- Cable
- 2.5 m fabric cable with plug
- IP rating
- IP20, indoor use
- Lead time
- Made to order, 6 to 8 weeks
All specifications are placeholders until tested and confirmed.
Downloads
- Spec sheet (PDF) [PLACEHOLDER]
- Install guide (PDF) [PLACEHOLDER]
Care
Dust with a soft dry cloth. Keep out of direct sun and away from heaters so the timber stays stable. A light coat of hardwax oil every few years brings back the sheen. Hard-wired lights must be installed by a licensed electrician.
